Small sterilization retort autoclave
1. Sterilization time is short
2. No dead angle
3. Heat distribeured evenly
Water spray sterilization retort was researched and development by the low-acid food heating processing expert.
Reasonable inner pipeline designing ensure evenly heat distribution and fast heat penetration.
Sterilizing effect based on customer's demand, keep food's flavor, colour and nutrition, and enhance attached value of food product, increase economic benefit for client.
Sterilization is a technology which control the whole process by pre-set sterilizing effect, the whole working process is more controllable, precisely and audio-visual, this technology can ensure the sterilization effect keep uniform for each batch.
It has a importance especially for tin can food.
1. Temperature rising and down indirectly, cooling water not connected with sterilizing water, they realize heat transform
By heat transfer, which can avoid second pollution.
2. Multiple-step temperature raising and down can keep the color and flavor of the food production
3. Spraying sterilization water can enlarge heat exchange area, enhance sterilization efficiency so get a fine effect
4. Equip with a large lifting range water pump, sterilizing water can spray from different angle through the spraying hole,
Which can generate a running airflow to make heat distribute evenly
5. Recycling sterilizing water, less water amount save water and heat energy
6. Precisely pressure control system can ensure food package won't change in cooling period, especially inflated packaged
Food
7. Adopting Siemens electronic component, ensure equipment running safely, reliable, and high efficiency
8. Door's opening and closing can be control automatic
9. Sterilizing basket can go-in and come-out automatic
Wenzhou Wanyuan Food Mechanical Factory- - Autoclave sterilizer retort
Small sterilization retort autoclave
Here below the autocalve sterilizer retort specification:
| Model |
GT7C 720 |
GT7C 1200 |
GT7C 2000 |
GT7C 2400 |
| Category |
Elementary Pressure Vessel |
| Internal Diameter (mm) |
900 |
1000 |
1100 |
1200 |
| Volume( m³) |
1.2 |
2 |
3.5 |
4.2 |
| Design Temperature |
143 degree C |
| Working Temperature |
123 degree C |
| Design Pressure |
0.3 MPa |
| Working Pressure |
0.15 MPa |
| Working Medium |
water\steam\compressed air |
| Main Pressure Part Material |
SS304 |
| Welding Coefficient |
0.7 |
| Corrosion Allowance |
1mm |
| Net Weight(kg) |
600 |
1100 |
1700 |
2000 |
| External Dimensions(mm) |
length |
2100 |
2800 |
3700 |
4000 |
| Width |
1300 |
1450 |
1600 |
1600 |
| height |
1650 |
1700 |
1800 |
1900 |
Audited Supplier 
){kind=link}
){kind=link}